Boss – Industrial 13 Ton 3 point Log Splitter – 3PT13T21
Boss Industrial would like to introduce you to the 13-Ton dual action 3-Point tractor mount log splitter. It is designed to fit CAT1 or CAT2 tractor mounts. Although final speed and splitting force are determined by your tractors hydraulic system, the model is designed to be splitting in either direction in about 4-seconds to 6-seconds per split for tractors’ hydraulic flow ranged from 3 GPM to 8 GPM.
Perfect for your small farm tractor. This 3PT tractor mount log splitter offers dual-action performance on-demand. With the tractor hydraulic system pressure ranges from 2000 psi to 3700 psi, this splitter potentially delivers to 13-Ton of splitting force with short cycle time. Strong 3-Point hitch frame is designed easy to hook up with your tractors in 20-minutes. In addition, two 100 in. L hoses are included.
- 3-point tractor mounted log splitter
- Recommended for 2 to 40 cords per season
- Attaches to a category 1 or category 2, 3-point hitch
- Uses your tractor’s hydraulic pump to power the splitter hydraulic valve and cylinder
- Innovative design splits in both directions, make use of both the extend and retract stroke to make splits, split wood twice as fast on forward and backward strokes, saves you time and increases your productivity
- Up to 13-Ton of splitting force, force varies depending on the tractor’s hydraulic system psi, easily split big logs up to 16 in.
- Splitting length: 20.5 in.
- Heavy-duty formed steel beam. 6.85 in. high carbon steel wedge
- Cylinder bore 3 in.
- Recommended tractor hydraulic flow: 3 GPM to 8 GPM
- Recommended tractor hydraulic psi: 2000 GPM to 3700 GPM
- 2 extra-large tube log trays included
- 1/2 in. x 100 in. inlet and outlet hoses included
Product Manual
Warranty
How to the define how powerful should be my log splitter?
Log splitters’ force is measured by Tonnage (5 Ton, 10 Ton, 20 Ton…), what represent the weight we’d need to place over the log to split it (instead of hitting it with an axe). When we use a 5 Ton log splitter it is like we place 10,000 pounds over the log to make it split.
OK but… how much Tons do I need to split my logs?
Considering you are going to split seasoned logs, the Tonnage (force) needed to split the logs is basically determined by two factors:
1) Tree’s hardness (Softwood or Hardwood?);
2) Logs’ thickness.
It happens because each different tree species may have different hardnesses and, also, the thicker is log, stronger it will be. So, to be sure that your log splitter will be able to split your logs, before taking the decision of which model you’ll be, we strongly recommend you to check on the table below what’s the Tonnage you’ll need, based on your Tree’s hardness and logs’ thickness.
| Tree | Wood Type | 6 inches | 12 inches | 18 inches | 24 inches |
|---|
| Aspen | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Spruce | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Poplar | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Fir | Softwood | 6 ton | 15 ton | 20 ton | 27 ton |
| Pine | Softwood | 6 ton | 15 ton | 20 ton | 27 ton |
| Cedar | Hardwood | 6 ton | 15 ton | 20 ton | 27 ton |
| Walnut | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Magnolia | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Beech | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Ash | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Maple | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Birch | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Elm | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Oak | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Locust | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Hickory | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Dogwood | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
So, if you still have any doubts, please feel free to contact us and our team of splitting specialists will be very happy to help you to choose the best log splitter for your necessity or, with you have already clear in mind what tonnage you need, check now our catalog and get ready to make your winter warmer!
Where can I use these log splitter?
On level and non-slippery terrain. The electric models can be used indoors/outdoors, however, the gas engine model can only be used outdoors.
What Log Splitter’s model do I need?
The most important points to select the best Log Splitter model is to know what of wood and also the thickness of logs you’ll need to split. Please check detailed orientation on “Force” Tab, inside the product’s page.
Is there any assembly required for my log splitter?
No. However depending on the model, you may need to assemble the operating level. See manual for instruction.
What’s the best for me, an Electric, Gas or Kinetic Log Splitter?
It mainly depends on the logs you’ll need to split (kind of wood and logs’ thickness). These information will define the splitting force you’ll need (how many Tons – please check detailed orientation on “Force” Tab, inside the product’s page). Usually for splitting forces of less than 10 Tons you’ll have good Electric Log Splitters, above this, Gas or Kinetic ones.
What kind of outlet do I need to operate my Electric Log Splitter?
115v, 60 Hz standard 3 prong outlet. See manual for additional information.
Our goal is to keep the order and delivery process as simple as possible. Products are delivered directly from manufacturers and they are shipped between 1 and 2 business days once you make the order. Total delivery time varies between 3 and 7 business days if your product is in stock.
Please check our Shipping and Returns policies for further information:
If you still have any doubt about the ordering and shipping process, feel free to contact us by email at [email protected].
Theo –
Fantastic!One handed operation.Store vertical.Quiet.Easily split my wood and several pieces that were impossible to hand split. Does everything I need it to do and then some. All my bonfire and camping trip wood is split and ready to go. This splitter saved me a lot of sweat and sore muscles, it also allows me to make even smaller pieces of wood, much smaller than I ever could by swinging a hand tool.Get one! You’ll love it !!
(0) (0) Watch Unwatch
Richard –
Heavy duty and easy to use. It splits without objection so far. The crummy box is like leprosy on a suicide mission. Styrofoam everywhere and junk on disassembly. Needs more wood and plastic over foam. Pump is almost loud enough to need ear protection.
(0) (0) Watch Unwatch
Donald –
Worked as advertised. Has not hesitated with any of the large hardwood trees I have split.
(0) (0) Watch Unwatch
Fezco –
I recently purchased this model and haven’t used it enough to see how it will hold up over time, but man does that thing split wood!! Was easy to assemble and looks very well made. Would have been nice if it would have had options for Hydraulic hose fittings as I had to make 2 trips to the implement dealership to get the right ends. I really like the auto retract feature, and this saves time. I would recommend purchasing one.
(0) (0) Watch Unwatch
Franklin –
Bought this unit on 23 Aug 2019. Great unit. I paid less than todays price. I suggest writing down all the pertinent info before operating unit. Model, serial number, etc. Ram will wipe out the sticker on first run. It should be located at the end of beam, near handle. Other than that, it is a great buy and a good unit.
(0) (0) Watch Unwatch
Billy –
This is one stout little beast! So far, I’m very impressed with its capability. Sure…..a 25 ton gas powered splitter is going to be faster and more capable, but with a little patience this machine can tackle most logs. One thing I don’t like is having to remember to open the wingnut vent. It’s easy to forget and blowing the seals if I do would really be upsetting!
(0) (0) Watch Unwatch