Product Description
Boss Industrial Commercial Grade 22 Ton 3-Point Splitter – 3PT22T25
This Boss Industrial 3 Point Tractor Drive Dual Action 22 Ton Horizontal / Vertical Log Splitter 3PT22T25 runs off your tractor’s hydraulics and will split in both the horizontal or vertical position for the larger logs. This 3 point wood splitter is fully adjustable for any category 1 or category 2, 3-point hitch size. Working height is from waist level and can be lowered almost to the ground or as low as your 3 PT arms can go.
We recommend your flow rate be a minimum of 8GPM. Your actual tonnage and split time will depend on your tractor’s hydraulic output. Average split times can be from 6-11 seconds. The exact tonnage will depend on your tractor’s output. *Tonnage ratings are rated at “maximum potential” which is 22 tons. The actual PSI of your tractor and other things such as environmental conditions can impact actual tonnage and cycle times. With the Boss Industrial 3 Point Tractor Drive Dual Action 22 Ton Horizontal / Vertical Log Splitter, you will split wood like a pro and keep your fireplace full all winter.
3-Point Tractor Mounted Log Splitter
- Recommended for 2 to 80 cords per season
- Attaches to a category 1 or category 2, 3-point hitch
- Uses your tractor’s hydraulics to operate the cylinder
Split Wood In Horizontal Or Vertical Positions
- Split smaller logs at comfortable waist height
- Switch to vertical, save your back & roll large logs into place
Up To 20 Tons Of Splitting Force
- Force varies depending on the tractor’s oil flow
Variable Cycle Time
- 14 to 25 seconds depending on hydraulic pressure
8-Inch High Carbon Steel Wedge
- 24″ log opening on 5-1/2″ heavy-duty formed steel beam
Easy To Use Controls
- One-hand operation
- Ram automatically returns to the start position
We recommend your flow rate be a minimum of 8GPM, your actual tonnage and split time will depend on your tractor’s hydraulic output, exact tonnage will depend on your tractor’s output.
- Tonnage: Up to 22 Ton depending on tractor
- Log opening: 25 in. maximum
- Operating position: horizontal or vertical
- Working height: adjustable from 3 point level
Boss stands by its excellent product quality with a 2-year warranty including hydraulics.
Owner Documents:
Product Manual
Product Brochure
Warranty
TRACTOR REQUIREMENT: CATEGORY 1 OR CATEGORY 2
SPLITTING FORCE: MAX. 22 TON, TRACTOR PSI DEPENDANT
TRACTOR HYDARULIC PRESSURE RECOMMENDED: 2000 – 4000 PSI
TRACTOR HYDRAULIC FLOW RECOMMENDED: 8~12 GPM
SPLITTING CYCLE: THE FASTED 11 SECONDS, TRACTOR GPM DEPENDANT
MAX. SPLITTING LENGTH: 25 IN.
SPLITTING WEDGE HEIGHT: 8 IN.
CYLINDER BORE: 4.0 IN.
OPERATION MODE: ONE HAND OPERATION
AUTO RETURN: YES
WARRANTY: 2 YEAR INCL. HYDRAULICS
Where can I use these log splitter?
On level and non-slippery terrain. The electric models can be used indoors/outdoors, however, the gas engine model can only be used outdoors.
What Log Splitter’s model do I need?
The most important points to select the best Log Splitter model is to know what of wood and also the thickness of logs you’ll need to split. Please check detailed orientation on “Force” Tab, inside the product’s page.
Is there any assembly required for my log splitter?
No. However depending on the model, you may need to assemble the operating level. See manual for instruction.
What’s the best for me, an Electric, Gas or Kinetic Log Splitter?
It mainly depends on the logs you’ll need to split (kind of wood and logs’ thickness). These information will define the splitting force you’ll need (how many Tons – please check detailed orientation on “Force” Tab, inside the product’s page). Usually for splitting forces of less than 10 Tons you’ll have good Electric Log Splitters, above this, Gas or Kinetic ones.
What kind of outlet do I need to operate my Electric Log Splitter?
115v, 60 Hz standard 3 prong outlet. See manual for additional information.
How to the define how powerful should be my log splitter?
Log splitters’ force is measured by Tonnage (5 Ton, 10 Ton, 20 Ton…), what represent the weight we’d need to place over the log to split it (instead of hitting it with an axe). When we use a 5 Ton log splitter it is like we place 10,000 pounds over the log to make it split.
OK but… how much Tons do I need to split my logs?
Considering you are going to split seasoned logs, the Tonnage (force) needed to split the logs is basically determined by two factors:
1) Tree’s hardness (Softwood or Hardwood?);
2) Logs’ thickness.
It happens because each different tree species may have different hardnesses and, also, the thicker is log, stronger it will be. So, to be sure that your log splitter will be able to split your logs, before taking the decision of which model you’ll be, we strongly recommend you to check on the table below what’s the Tonnage you’ll need, based on your Tree’s hardness and logs’ thickness.
| Tree | Wood Type | 6 inches | 12 inches | 18 inches | 24 inches |
|---|
| Aspen | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Spruce | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Poplar | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Fir | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Pine | Softwood | 4 ton | 12 ton | 20 ton | 27 ton |
| Cedar | Hardwood | 6 ton | 15 ton | 20 ton | 27 ton |
| Walnut | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Magnolia | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Beech | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Ash | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Maple | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Birch | Hardwood | 7 ton | 20 ton | 26 ton | 30 ton |
| Elm | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Oak | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Locust | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Hickory | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
| Dogwood | Hardwood | 10 ton | 22 ton | 26 ton | 30 ton |
So, if you still have any doubts, please feel free to contact us and our team of splitting specialists will be very happy to help you to choose the best log splitter for your necessity or, with you have already clear in mind what tonnage you need, check now our catalog and get ready to make your winter warmer!
Our goal is to keep the order and delivery process as simple as possible. Products are delivered directly from manufacturers and they are shipped between 1 and 2 business days once you make the order. Total delivery time varies between 3 and 7 business days if your product is in stock.
Please check our Shipping and Returns policies for further information:
If you still have any doubt about the ordering and shipping process, feel free to contact us by email at [email protected].
Michael –
This machine is a beast. Tough machine. Really worth the money if you split a lot of wood. At first I was like, that’s expensive. After I used it, I was really impressed. Amazing customer service from Claveberg! Happy buy
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
VP –
Awesome product. Make sure your tractor is big enough to drive the hydraulics. I have a Kioti 55hp and it works great.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jeremykoz –
Assembly was simple. The splitter is very well built, and works great. I would recommend it for sure. It can be a little slow to cycle when the tractor is idling so I run the throttle up just a little bit and that seems to make a huge difference. I have a 40 hp tractor. Can’t wait to use it for years to come. Has split everything we’ve thrown at it so far.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Gregory –
Clear instructions. Easy to set up. It works just the way I hoped it would.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mike –
For what I need it for it works perfect I have even split of larger pieces with little or no trouble at all would recommend this for any home use
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal