Kunz Engineering – AcrEase Rough Cut Model 44″ – MR44B
Have you thought of mowing using your UTV, but stopped midway because of the challenges you’d face? Well, you aren’t the only one to do so! A few short months ago I was in a similar situation. That’s when I came across 44” Rough Cut Mower by Kunz
44″ rough cut model with a non-commercial grade single cylinder electric start engine and manual clutch blade engagement. Works great behind an ATV for smaller acreage jobs or tight clearance conditions.
- 44″ Rough Cut Mower Features:
- 44″ Cutting Width
- 19 HP Briggs & Stratton Engine
- Commercial Grade Deck Assembly
- 4 Tire Design
- Quick Single Crank Height Adjust System
- Height Adjustment Range From 2″ to 8″
- Manual Clutch Blade Engagement
- Conservative 2″ Diameter Sapling Rating
- Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.
The Wetlands Kit consists of an extra set of tires and mounting brackets
- Great for wetlands or marshy areas that stay wet all year around
- Works well in combination with small personal amphibious vehicles
- Kit more than doubles the tire surface area in contact with the ground
- Easy to install
- Works on all existing and new rough cut mowers
- The rough cut mower will not float with the wetlands kit installed. Water greater than 2-3″ in depth should be avoided.
- With the Wetlands Kit installed the minimum cutting height is 3.5″-4″.
The Electric Lift Kit consists of all of the mounting hardware, brackets, electric actuator and wiring with remote control panel.
- Great for constantly changing terrain and grass/brush heights
- Allows for quick cutting height changes on the go from the seat of the tow vehicle
- Raise up and over rocks and logs with ease
- Heavy duty 1500 lb linear screw actuator made by Linak
- Works on all existing and new rough cut mowers
The Floatation Kit consists of one additional front and rear tire, mounting brackets and hardware
- Great for mowing around ponds and on rough uneven ground where scalping would normally occur
- Clamping style receiver allows for adjustments from side to side with both the front and rear tires
- Pinned receivers make for quick kit removal when not needed
- Works on all existing and new rough cut mowers
Kunz Engineering – AcrEase Rough Cut Model 44″ – MR44B
- 19HP Briggs & Stratton Professional non-commercial grade single cylinder engine.
- The blade spindles used on the AcrEase mowers are built out of heavy duty welded steel hubs, 30mm (1-3/16″) steel shafts, machined steel blade holders and large sealed ball bearings.
- The cutting height can quickly and easily be adjusted from 2″-8″ with the single crank height adjustment system.
- The main deck is built out of 10 GA (.135″) thick steel with a 3/16″ thick steel top plate for reinforcement. An additional 1/4″ thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8″ thick.
- Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
- The blades are easily engaged by simply shifting a manual clutch lever.
- The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
- Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time.
ENGINE
Engine Brand: Briggs & Stratton Intek
Starting System: 12-Volt Key Start
Engine Cycle: 4-Cycle
HP: 19 HP
CC: 540 CCs
Fuel Tank Size: 3 Gallons
Engine Cylinders: 1 Cylinder
Oil Filter: Yes
Consumer Engine Warranty: 2 Years
Commercial Engine Warranty: 1 Year
MOTOR
Battery Voltage: 12 Volts
Battery Type: Lead Acid
Battery Included: Included
DECK
Cutting Options: Rear Discharge
Deck Material: 8-Gauge
Deck Construction: Welded
Deck Positions: Infinite Positions
Spindle Material: Steel
Blades: 2 Blades
Cutting Width: 44 Inches
Cutting Height: 2.0-8.0 Inches
ACCESSORIES
Rear Bagger: No
Engine Guard: No
Hour Meter: No
Arm Rests: No
Front Bumper: No
Trailer Hitch: Included
Mulcher Kit: No
Headlights: NoWHEELS
Front Tire Size: 15 x 6 Inch
Tire Type: Pneumatic Wheels
OVERVIEW
Weight: 520 Pounds
Consumer Warranty: 1 Year
Commercial Warranty: 1 Year
Product Length: 95.5 Inches
Product Width: 46.5 Inches
Product Height: 29.0 Inches
Additional Model Numbers: 1003725, MR44B
Click Here to Download the Specification Sheet
Click Here to Download the Manual
Price Guarantee
We do our best to keep up with everything the competition is doing so that we can ensure you the absolute best prices online. Unfortunately, sometimes we aren’t immediately aware of every competitor’s price changes.
If you find another online store that offers a lower price than us, please let us know.
Limitations On Our 100% Price Guarantee
- Promotions such as rebates and “buy one, get one free” offers are not eligible
- Will be considering the final price of the product including shipping and taxes
- The item must be in stock on the competitor’s website
- The competitor must be an online store; they may not have a retail location
- The website cannot be a big retailer or auction website (ie; Amazon, Home Depot, eBay, overstock, etc.)
- The product must be listed at Google Shopping
- The competitor must be an authorized retailer for the product in question
- The price match guarantee is on the total price paid, which includes the item price, shipping charges and any additional charges that might be included
Our goal is to keep the order and delivery process as simple as possible. Products are delivered directly from manufacturers and they are shipped between 1 and 2 business days once you make the order. Total delivery time varies between 3 and 7 business days if your product is in stock.
Please check our Shipping and Returns policies for further information:
If you still have any doubt about the ordering and shipping process, feel free to contact us by email at [email protected].
Garrett –
Bought it along with The Floatation Kit to work around a lake, a heavy day of work that was made incredibly easy by this machine. It’s really worth the investment and it arrived faster than the estimated time.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal